background image

26 

 Operation

 

To be installed to automated machinery (remote operation) 

The operation can be switched on/off by controlling the power input if the power switch on the unit 
is kept on.   

When an external power supply is used 

Without use of Attached AC adapter, Power supply 
from outside is available. 

 

 

 

 

 Maintenance

 

 

  CAUTIONS

 

IN MAINTENANCE AND CHECKS

 

 

DO NOT 

DISASSEMBLE

 

Do not disassemble F-6R. Servicing is reserved for service engineers.

 

 

UNPLUG 

POWER CABLE

 

Before  making  checks,  unplug  the  power  cable.  Working  with  the 
power on can result in electric shock and breakdown. 

 

PROHIBITED 

Do not wipe F-6R with detergent or solvent. It may cause cracking and 
result in electric shock or breakdown. 

 

DO NOT WET

 

Do not wet F-6R. Contact with moisture can result in electric shock or 
breakdown. 

 

CHECK

 

Periodically check F-6R. Failure of periodical inspection can result in 
early breakdown. 

 

In normal usage, the F-6R does not require maintenance, but the casing and electrode needle 
may sometimes require cleaning. Dirt and wear in the electrode needle area can cause a decline 
static erasing capacity. It is also recommended to measure ion balance and ion output as a 
means for checking for a drop in capacity. 

Casing Cleaning 

To clean the casing, wipe with a dry soft cloth. Suck up dust from openings with a vacuum 
cleaner. 
Do not use detergent or solvents such as alcohol or paint thinner. 

How to clean/replace the filter 

How quickly the filter becomes dirty will vary depending on the installation location and the 
operation conditions. A dirty filter will degrade the static erasing performance and the fan wind 
volume, so clean the filter first. Before cleaning the air filter, shut OFF power and unplug the 
power supply adapter from the electrical outlet. Also, lay F-6R on a cloth or mat to clean not to 
damage the casing and other parts. 

How to Clean 

1) Detach the filter cover. 
2) Remove the pre-filter. 
3) Wash under running water. 
4) Once clean, drain of excess water and dry before reinstalling. 
* If unable to clean or if severely damaged, replace the pre-filter. 
* Use the optional filter SDJ-08F. 

 

 

 

1

2

1

DC24V
±5%

2

Summary of Contents for F-6R

















Reviews: