background image

18 

For Your Safety

 

Safety Precautions 

●Carefully read these Safety Precautions before use. Observe the precautions indicated herein to 

ensure safety.

 

●Safety precautions in this instruction manual are categorized into two types by the degree of 

danger associated with each of the followings. Based on danger analyses performed by Vessel, 
all recautions in this instruction manual are of the CAUTION level. 

●If the equipment is used in a manner not specified by the manufacturer, the protection provided by 

the equipment may be impaired. 

 

 

WARNING 

Indicates that improper handling can lead to serious injury or even 
death. 

 

CAUTION 

Indicates that improper handling can lead to minor injury and property 
damage. 

 

 

This symbol indicates a WARNING or CAUTION. 

 

This symbol indicates a prohibited action. 

 

This symbol indicates a mandatory required action 

 

CAUTIONS

 

 

PROHIBITED

 

Do not use F-6R in environments that require explosion - proofing.F-
6R is not of explosion-proof construction, therefore explosion or fire 
may occur. 

 

PROHIBITED

 

Do not use F-6R in flammable atmospheres. The corona discharge 
can act as an ignition source and cause an explosion or fire. 

 

PROHIBITED

 

Do not use F-6R in environments subjected to sharp temperature 
fluctuations or dewing. This kind of environment can lead to 
breakdown. 

 

DO NOT WET 

Do not use F-6R in highly damp places or anywhere it may be wet by 
water, oil, solvent or other liquid. Contact with moisture can result in 
electric shock or breakdown. 

 

PROHIBITED 

Do not use F-6R for anything other than static erasure or dust 
removal. 

 

PROHIBITED   

 

Do not use F-6R with power supplies of ratings not specified in the 
specifications. Inappropriate power supplies can result in fire and 
electric shock. 

 

PROHIBITED 

Do not install, use or service F-6R until having understood the 
information in this instruction manual. 

 

REMEMBER 

Keep this instruction manual in a safe handy place for future 
reference. 

 

CAUTION

 

VESSEL assumes no responsibility whatsoever for consequences 
arising from the use of this product. 

 
 

 

Summary of Contents for F-6R

















Reviews: