23
■
Installation
Location
Warning
PROHIBITED
Do not use in environments with flammable gases and solvents in the
atmosphere, requiring explosion-proof equipment. As this product is not
explosion-proof, there is a risk of explosion or fire.
Caution
REMEMBER
・
Take into consideration the ambient conditions surrounding the installation
location.
・
Install indoors where it will be sheltered from wind and rain.
・
Install in a location where it will not be exposed to water, oil or fine dust.
・
Do not install in locations where considerable vibrations or shocks will be
transmitted to the unit.
・
Do not bring into areas with high humidity, or where there are corrosive gases
such as acids, alkalis or chlorine gas exist. Also, do not use the product in these
types of areas. There is a risk of electric shock or product breakdown.
・
Please use in areas with a temperature between 0 to 45
℃
, and a humidity of
10 to 90%.
REMEMBER
Install place should be decided with enough consideration to operating and
maintenance of G-9 safely.
Installation
Caution
REMEMBER
Do not put in use G-9 until completion of connection of Clean Dry Air.
REMEMBER
Air system installation and repairs shall be performed by a skilled engineer.
REMEMBER
This product should be managed and operated by whom has enough skill and
knowledge of products which uses high pressure compressed air.
REMEMBER
This product includes a part which generate high voltage electricity. There is a
possibility to touch those part and take electrical shock. Places for putting this
product in use shall be decided with enough considering about this risk to
protect secondly disaster such as falling.
REMEMBER
G-9 is precise mechanical / electrical products includes fragile mechanism and
sensitive electric parts. Durability for shock etc. comes from ordinally work has
been considered and designed, however, never treat this product roughly (e.g.
throwing). Take care of unexpectable crash to hard frames caused by return
spring of tool balancer.
PROHIBITED
Do not disassemble this product. Do not modify this product (e.g. affix buffer
material or cushioning).
PROHIBITED
Do not put materials into nozzle when G-9 is in work. Do not loosen / remove
nozzle when G-9 is in work. There is an electrical hazard.
PROHIBITED
Do not use G-9 near by power line of motor. This product includes sensitive
electric parts that might be affected by electric noise.
