background image

12 

 

LIMITED WARRANTY: 

VESSEL expressly warrants that for a period of one (1) year from the date of purchase, VESSEL static 
erasers will be free of defects in material (parts) and workmanship (labour). Within the warranty 
period, Defects occurring will be repaired or products will be replaced at VESSEL's option and 
expense, if VESSEL receives notice during the warranty period. Defective products must be returned 
to VESSEL Osaka Japan with proof of purchase date. And if your unit is out of warranty, VESSEL will 
quote repair charges necessary to ship your unit freight prepaid to where you have originally 
purchased. 
 

WARRANTY EXCLUSIONS: 

THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU OF ALL OTHER PRODUCT WARRANTIES, 
EXPRESSED AND IMPLIED, INCLUDING FITNESS AND MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE WHICH ARE SPECIFICALLY DISCLAIMED. 
The express warranty will not apply to defects or damage due to accidents, neglect, misuse, 
alterations, operator error, or failure to properly maintain, clean, or repair products. 

 

LIMIT OF LIABILITY: 

This electronic static eraser use high voltage corona discharge and should not be used in or near 
flammable or explosive environments. In no event will VESSEL or any seller is responsible or liable for 
any injury, loss or damage, direct or consequential, whether based in tort or contract arising out of 
the use of or the inability to use the product. Fulfillment of VESSEL's warranty obligations will be 
Customer's exclusive remedy and VESSEL's and Seller's limit of liability for any breach of warranty or 
otherwise. Before using this unit, users shall determine the suitability of the product for their 
intended use, and users assume all risk and liability whatsoever in connection therewith. 
 

Model 

HPG-1 

 

Warranty 

(1) year from the date of purchase 

 

Customer 

Name 

 

Address 

 
 

Tel. No. 

 

Dealer 

Name/Address/Tel. No. 
 
 

 

Manufactured by: 

 

17-25, Fukae-Kita 2-chome, 

Higashinari-ku, Osaka  537-0001 Japan 

Tel : +81 6 6976 7778    Fax : +81 6 6972 9441 

E-mail : export@vessel.co.jp 

URL : http://www.vessel.jp 

                                                                             

MADE IN JAPAN 

17082900.00 

 

Summary of Contents for HPG-1













Reviews: