10
■
Component Functions
CAUTION
Disassembly Prohibited
Absolutely do not replace the hood or dust collector with another
device or use a substitute device.
Do not remove components, or modify or unreasonably disassemble
or assemble the product.
This product is manufactured in accordance with safety and
performance standards, so removing components or modifying the
product is dangerous.
Please be sure to understand the components and functions of the dust collector work platform and to
operate the unit safely and to work safely.
Work Hood
1. Work hood
This is a booth that improves the dust collection effectiveness of the dust
removal work.
2. Clear acrylic sheet
This plate keeps dust from dispersing during the dust removal work. It
also lets in light from the top to allow the work surface to be clearly seen.
3. Perforated plate
This is a work plate for use during the work. It prevents large objects from
falling inside the chamber.
4. reflection
plate
This senses when work is put in or removed and sends a signal to the air
solenoid valve. For information about the sensitivity and timer, refer to
the “Sensor” item under “Operation” in this manual.
5. Air nozzles
Two flexible nozzles that can be pointed in any direction.
6. Static eraser
This removes electrostatic charge. For information regarding the detailed
operation of the SDJ-08 Static Eraser, refer to the “Static Eraser” item
under “Operation” in this manual.
7. Operation button
This button is located close to the dust collector and is used to start and
stop the operation. A push button type main switch is attached to the dust
collector.
8. Air solenoid valve
This supplies or stops the compressed air in response to the sensor
signal.
9. Duct connection port
(exhaust)
This connects the duct to the dust collector.
10. Dust collection duct
hose
Bellows type with a length of 1.6 m when extended.
11. Connection cord
This is a 1.6 m long connection cord for connecting to the dust collector.
12. Handle
This is used to hold the hood when moving it.
Summary of Contents for IPC40-E
Page 9: ...9 Dimensions ...