Vessel Stat Clean CF300-E Instruction Manual Download

Page: 8 / 16

2 4

■

Before Use

Connector connection

Insert the included special AC adapter connector into the jack
on the back of the body.

Power Supply Adapter

Use the power adapter

（

AD24-ITE

）

which is specifically designed for use of CF300-E.

The AC adapter plug is a 2-pronged plug.
Connect this to a power outlet that has a ground terminal.

Connection of grounding wire

Plug this unit into a power receptacle which has a ground terminal.
If no such power receptacles are available, ground the unit with a wire
connected to the ground terminal of the unit.

Daily Checks

Check CF300-E for inspection before use. Refer “Maintenance” pages.

・

Dust on electrodes

・

Contamination of the front cover

・

Dirty filter

・

Disconnection of the grounding wire

・

Loose connector

・

Damaged or loose parts

・

Adhering condensation or water droplets
If damage or trouble is detected, contact the supplier for servicing.

Summary of Contents for Stat Clean CF300-E

















Search results

Summary of Contents for Stat Clean CF300-E

Reviews:

Related manuals for Stat Clean CF300-E

Brands by name

Popular brands

Vessel Stat Clean CF300-E, Instruction Manual

Search results

Summary of Contents for Stat Clean CF300-E

Reviews:

Related manuals for Stat Clean CF300-E

Brands by name

Popular brands