4
* Product Features / Specifications
Overview
Connecting this product between the DC type VE series electric screwdriver and a dedicated controller
can add the counter and slow-start functions. (Excluding VE-1500 and VE-2000)
Features
* Power switch
The counter function can be stopped, and only the power can be supplied to the electric screwdriver for
operation.
* Counter function
Count : The number of screws tightened is counted up or down, and the remaining quantity for further
screws is displayed.
POKA YOKE (careless mistake prevention) : When the set number of screws has been tightened, the
operator is notified with an alarm sound and light as completion.
Final tightening : Tightened screws can be firmly re-tightened.
Tightening fault : Insufficient tightening or an incorrect screw can be notified with an alarm sound and light.
* Screw tightening upper limit/lower limit time setting function
Differences in the screw length (error in length) can be judged.
* Slow-start function
This function can be set to rotate at a low speed at the start of tightening, and then return to a normal speed.
This function is effective for precision small screws, resin tapping, etc.
* External signal input/output
The product can work with an external device to manage the screw tightening process.
Example:
-
Working with an alarm lamp or three-color tower lamp can confirm the screw tightening OK, NG
or OK ALL state with the lamps.
-
When it works with a speaker or buzzer, the counter operation volume can be adjusted.
-
When it works with a sensor and the presence of a workpiece is recognized, the operation of the
electric screwdriver can be controlled.
-
When it works with the PLC, this product can be coordinated with various external devices.
