background image

 

19 

 

LIMITED WARRANTY AND AFTER SALES SERVICE 

Returns 

If you are not fully satisfied, our products come backed with a 
30 day, no questions asked, money-back guarantee. To be 
eligible for a full refund, you must: 

 

Have purchased your product in the last 30 days directly 
from Vesta Precision  

 

Have the original order number or email that was used 
during your purchase 

 

Email your request for your return and full refund 

Full refunds can only be provided within 30 days of purchase 
directly from Vesta Precision. Devices purchased through 
resellers, retail partners, or other websites are not eligible for a 
return and full refund. Please consult their return policies for 
more information.  We cannot provide a full refund for any 
damaged devices not covered under our limited warranty. 

 

Exchanges 

We provide products with a few different options. Retail 
exchanges are eligible within 30 days of original date of 
purchase. To be eligible for an exchange, you must: 

 

Have purchased your product in the last 30 days directly 
from the Vesta Precision  

 

Have the original order number or email that was used 
during your purchase 

 

Email us to request an exchange 

Summary of Contents for C20v
























Reviews: