14
Surface
The high temperature paint finish normally requires no treatment. Any
damage or wear to small areas of the paint finish may be remedied using
Thermacure high temperature aerosol paint available from stove shops and
from Vesta. Make sure the stove is cold and read the instructions on the can
carefully before applying the paint. Applying too much paint can cause
blistering. If this occurs the surface must be sanded back to the bare steel
prior to re painting.
Final Note:
We hope that you enjoy your experience and that we meet all of your ex-
pectations.
Occasionally some people experience problems with their wood burner that
is caused by poor installation or chimney problems. If you should have any
problems with your woodburner please contact us through the link on our
website www.vestastoves.co.uk
Thank you for choosing Vesta.
Summary of Contents for 4
