7
Open the top and bottom air control fully
This is done by sliding the bottom air control into
the left position, and rotating the top air control until the
slots are aligned. See Fig 1.
Place rolled up/scrunched newspaper into the back of the
appliance and stack small kindling/sticks into the back of
the fire. A few larger pieces of fuel can be added to each
side of the pile. Firelighters can be used if required.
Larger pieces of wood can now be added slowly towards
the back of the fire. Adding too much cold fuel will put
out the fire.
The bottom air control can now be closed down and the
fire regulated by means of the airwash. Opening the bot-
tom control slightly helps to draw the fire into the stove
and will allow the door to be opened for loading more
easily.
Lighting a wood burner is a skill and is learned over the fist
few weeks of owning your wood burner, It can be frustrating
at first until you get to know your fire and your chim-
ney……...
Summary of Contents for 4
