15
Cleaning Filters
IMPORTANT: Drain oil from oil containers before oil and residue overflow!
The metal filters fitted by the factory are intended to filter out residue and grease
from cooking . It need not be replaced on a regular basis but are
required to be
kept clean.
Filters should be cleaned after every 30 hours of use.
Remove and clean by hand or dishwasher. Spray “Formula 409®
” or equivalent
degreasing detergent and leave to soak if heavily soiled. Dry filters and re-install
before using hood.
Replacing Filters
Should aluminum grease filters wear out due to age and prolonged use , please
contact your local reseller for replacement filters
. (
Note
:
Also
replace
damaged
filter that has punctured or broken mesh, bent or broken frame.)
Replacing the light light
WARNING
Light bulb become extremely hot when turned on.
DO NOT touch bulb until switched off and cooled.
Touching hot bulbs could cause serious burns.
1
2
3
4
Replacing LED Light Fixture
This range hood uses LED light fixture: 2W Max 12V LED
Make sure the range hood is unplugged or turn OFF breaker and the lights are
cool to touch.
Place a flat-head screwdriver between light housing and hood body, gently
pry up the light housing and search for the metal clip
.
Apply force to the metal clip and pull out the light fixture
.
Disconnect the power cable and discard the old light fixture
.
Reverse the steps to install a new halogen light fixture. Turn ON breaker and
range hood to test for operation.
