3
READ ALL INSTRUCTIONS BEFORE INSTALLING AND OPERATING
THIS APPLIANCE
Important Safety Notice
•
The installation in this manual is intended for qualifed installers, service
technicians or persons with similar qualifed background. Installation and
electrical wiring must be done by qualifed professionals and in accordance
with all applicable codes and standards, including fire-rated construction.
installing the unit due to lack of appropriateelectrical and technical background.
•
DO NOT attempt to install this appliance yourself. Injury could result from
necessary to remove any parts for installing, cleaning or servicing.
•
Range hood may have very sharp edges; please wear protective gloves if it is
•
Activating any switch ON before completing installation may cause ignition or
an explosion.
•
Due to the size and weight of this range hood, two people installation is
recommended.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJUR Y TO PERSONS:
explosive materials and vapors.
equipment may be affected by this unit’s operation.
and the American Society of Heating , Refrigeration and Air Conditioning
•
Before servicing or cleaning unit, switch power OFF at service panel and lock
service panel to prevent power from being switched ON accidentally.
Engineers
(ASHRAE), and the local code authorities.
•
Clean grease laden surfaces frequently. To reduce the risk of fire and to
disperse air properly, make sure to vent air outside.
DO NOT vent exhaust int o spaces between walls, crawl spaces , ceiling ,
attics or garages.
•
Ducted fans MUST always be vented to the outdoors.
•
For general ventilating use only
. DO NOT use to exhaust hazardous or
•
The combustion air flow needed for safe operation of fuel-burning
Follow the heating equipment manufacturer’s guideline and safety standards
such as those published by the National Fire Protection Association (NFPA),
