2015.A
4
4. Precautions & Recommendations
4.1 Operation Tips
1. Installation and maintenance shall be done by professional technicians. If necessary,
contact the technicians. Grounding connection of the device must comply with the
local regulations. (Warning: Improper operation, installation or maintenance may
cause property damage, injury or death etc.. Read this instruction manual thoroughly
before installing, operating or servicing this equipment.)
2. This product is a commercial machine that needs to be operated by trained cook. Do
not dismantle or self-modify the machine. Dismantlement and self-modification may
cause casualty.
3. Before cleaning, unplug and cut off the power supply. During cleaning, do not aim at
the appliance with water jet. Water may conduct electricity, that may cause electric
shock due to leakage.
4. Do not pat the product or put any heavy objects onto it. Abnormal operation may
cause damage and danger. Do not touch the appliance with hands directly due to
high temperature during or after operation, especially the hot area with high
temperature which may cause scald.
5. Do not use extra power supply that not marked on the product.
6. Do not use power knife that not conforming to safety standard.
7. To prevent damage, turn off the switch ASAP when near the thunder zone.
8. Do not destroy the furnace surface with hard or sharp objects.
9. After working, turn off the switch.
10. Circuit installation and maintenance shall be done by qualified technicians.
11. If the power cord is damaged, to avoid hazard, substitution should be done by
manufacturer or its maintenance department or similar professional personnel.
12. Do not aim at the electrical box with water directly, nor do immerse it into water for
cleaning.
4.2 Storage & Transport
1. The packaged device should be stored in a well-ventilated warehouse without any
corrosive gas instead of exposing to the open air. Should any temporary storage
needed, please take measurement against raining.
2. For safety sake, this device has already been checked by qualified personnel before
transportation. Please take care when handling it. Please check the delivery upon
completeness and transport damage immediately after receipt. In case of visible
damage, do not accept. The carrier takes full responsibility for the damages caused
during transportation. Hidden damages should be reclaimed immediately after notice,
as claims for damages can only asserted within the effective period for complaints.
3. During transportation, the machine should be carefully handled, do not put it upside
down to prevent from damaging the shell and inside.
