OPTION 1:
VERTICAL ROOF VENTING
OPTION 2:
HORIZONTAL WALL VENTING
Venting Methods
This range hood is factory set for venting through the roof or wall.
Vent work can terminate either through the roof or wall. To vent
through a wall,
a 90° elbow is needed.
IMPORTANT:
NEVER exhaust air or terminate duct work into spaces between walls, crawl
spaces,
ceiling
, attics or garages. All exhaust must be ducted to the outside
.
Use metal/aluminum duct work only.
Fasten all connections with sheet metal screws and tape all joints with certified
Silver Tape or Duct Tape.
Use caulking to seal exterior wall or roof opening around the cap.
11
Summary of Contents for Rome VRH-ROME-30SS
Page 1: ...Rome User Manual VRH ROME 30 36SS ...
Page 28: ...www vesta kitchen ...