ADJUSTING THE STOPWATCH HAND POSITION
Before setting the time, check if the Stopwatch 1/10 second, second and minute hands are
at the “0” (12 o’clock) position. If the stopwatch is in use, press the button in the following order
to reset it, and then check if the hands return to “0” position. For detail see “HOW TO USE
STOPWATCH”.
If the stopwatch is counting: (A) ----------> (B)
If the stopwatch is stopped: (B)
If the split time is displayed: (C) ----------> (A) ------------> (B)
*If either of the stopwatch hands are not at the “0” position, reset them following the procedure below:
0
SEC 1/10
SEC
60
10
50
20
40
30
02
02
04
06
06
04
08
08
0
0
SEC 1/10
SEC
60
10
50
20
40
30
02
02
04
06
06
04
08
08
0
1. Pull out the crown to the
second position.
2. Press button (A) or (B) to reset the
stopwatch 1/10 second, second and minute
hands to “0” position.
*By pressing button (A), set the stopwatch
1/10 second hand
*By pressing button (B), set the stopwatch
second and minute hands.
*The stopwatch minute hands moves
correspondingly with the stopwatch second
hand.
*The hands move quickly if the respective
buttons are kept pressed.
3. Push the crown back to the
normal position.
Crown
Stopwatch second hand
Stopwatch
minute hand
Stopwatch 1/10
second hand
0
SEC 1/10
SEC
60
10
50
20
40
30
02
02
04
06
06
04
08
08
0
60
15
45
30
MIN
60
15
45
30
MIN
60
15
45
30
MIN
Summary of Contents for RESTRICTOR
Page 1: ...RESTRICTOR...
Page 8: ...VESTAL WATCH...
