Down time Basic functions
By operating the combination of
set
and
down
button you can
set the down time.
Setting the down time can be performed as follows:
1.
Press the
set
button first and keep it pressed, then:
A. Press the
down
button and keep it pressed to
fast forward
the down time.
B. Shortly tap the
down
button to
slow forward
the down
time.
or
2.
Press the
down
button first and keep it pressed, then:
A. Press the
set
button and keep it pressed to
fast reverse
the down time.
B. Shortly tap the
set
button to
slow reverse
the down time.
The display will now indicate the set value. Once the program-
ming buttons are no longer operated, the display will indicate the
current time again. Tapping the
down
button will check the set
value and the display will again indicate the previously set down
time. After approx. 2 seconds, the display will indicate the cur-
rent time again.
- 51 -
G
Basic functions Random generator
The random generator generates the so-called random time
which causes the roller shutters to move up or down with a devia-
tion of +/-15 minutes to the previously programmed times(*).
The “randomly” moving up and down roller shutters give the
impression of an inhabited house and thus provide additional
protection in case the house owner is absent for an extended
period of time.
Simply press the
random
button to activate the random generator.
The display will now indicate
a
(Z)
in the upper right hand
corner.
(0ß8:0ß0Z
Note:
The random generator will disable any previously set
reverse function (please see page 60).
Press the
random
button again to deactivate the random gen-
erator. The random generator is now turned off, the
(Z)
in the
display will disappear and the roller shutter will move up and
down accurately at the times you have previously programmed.
(*)Annotation:
If the Astro function is activated, the times will
deviate by +/-15 minutes from the actual sun-
rise and sunset times.
- 52 -
G
