English
- 41 -
Operation with the Remote Control
• The remote control of your TV is designed to control
all the functions of the model you selected. The
functions will be described in accordance with the
menu system of your TV.
• Functions of the menu system are described in the
following sections.
Volume Setting
• Press “
V +
” button to increase the volume. Press “
V -
”
button to decrease the volume. A volume level scale
(slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• Press “
P -
” button to select the previous
programme.
• Press “
P +
” button to select the next programme.
Programme Selection (Direct Access)
• Press numeric buttons on the remote control to
select programmes between 0 and 9. The TV
will switch to the selected programme. To select
programmes between 10-199 press the numeric
buttons consecutively. The limit of the delay time
is 3 seconds.
• Press directly the programme number to reselect
single digit programmes.
Media Browser Menu (USB Mode)
• After plugging the USB disk correctly, the TV will
switch to USB mode and the following message will
be displayed on the screen.
Select YES by using “ ” or “ ” button and press
OK button on the remote control to continue.Media
Browser menu contents (depending on the contents
of your USB drive) will be displayed.
If you want to quit USB mode, press
“MENU”
button on the remote control for switching back to
TV mode.
Note: Movie Sense and Pixellence features cannot
be set while in Media Browser mode.
Using USB Mode Function Indicators
There are functional indicators located on the upper
right section of the Media Browser OSD (On-Screen-
Display).
Shuf
fl
e
This symbol becomes highlighted when you select
SHUFFLE option while playing a
fi
le / slideshow
by pressing
“INFO”
or
RED
(depending on the
instructions displayed on On-Screen-Display) button
on the remote control. If you press
“INFO”
button
on the remote control again, this indicator will be
inactive again.
Loop
This symbol becomes highlighted when you select
LOOP option by pressing the
BLUE
button on the
remote control. If you press
BLUE
button again, this
indicator will be inactive again.
Playback Status
This symbol indicates the current playback status.
Note:
You can also navigate through
fi
les stored in your USB
disk by using the numeric buttons (1-9).
While a selected
fi
le is being played, you can skip to
previous or next
fi
le by using “ ” or “ ” button.
• You can play the MP3, video and JPG
fi
les from
a USB memory stick. Use “ ” or “ ” button to
highlight a
fi
le or folder. If you select a
fi
le, press OK
button to view/play that
fi
le. If you select a folder,
again press OK button to list to contents.
Note : Some USB compliant devices may not be
supported.
02_MB35_[GB]_COST_3900UK_ANALOG_42905W_GOLD1_10073605_50191707.indd 41
02_MB35_[GB]_COST_3900UK_ANALOG_42905W_GOLD1_10073605_50191707.indd 41
13.05.2011 14:27:44
13.05.2011 14:27:44
