English
- 91 -
Program Guide
This section is same with the instructions given
in the General Operations page. Please see
Electronic Programme Guide (EPG) section in
the General Operations part.
Recording Timers
IMPORTANT
:
To view recording timers or record
programmes, you should first connect a USB disk to
your TV
while the TV is switched off
.
You should
then switch on the TV to enable recording feature.
Otherwise, recording feature will not be available.
You can set or display programmed recording
timers (for recording on a USB disk) by using
Recording Timers
menu.
Press the
M
button to display the main menu
and use the “ ” or “ ” button to highlight the
“Recording Times” line and press the
OK
button.
All available recording timers will be displayed.
You can add, remove or display previously set
timers via this screen:
The green line at the bottom of the screen
displays available disk space. Red line indicates
used disk space.
Note: It is not possible to record or set timer for two
individual events at the same time interval.
Adding a Recording Timer
Press YELLOW button on the remote control to
add a recording timer to this list. The following
screen appears to add a timer:
Mode
: Selects recording timer mode.
Channel
: Selects a channel.
Record Type
: Defines recording type.
Date
: Starting date is entered via the Left/Right
and the numeric buttons.
Start
: Starting time is entered via the Left/Right
and the numeric buttons.
End
: Ending time is entered via the Left/Right
and the numeric buttons.
Duration
: Displays recording duration.
Repeat
: You can set a timer to be repeated as
Once, Daily or Weekly.
Playback
: This setting defines playback control.
It can be set as Allowed, Disallowed or as “ Use
Parental Settings”: You might be asked to enter
your PIN code.
Change / Delete
: permits or prohibits any
modifications for other users. You might be
asked to enter your PIN code.
After setting options you prefer, you should
press
GREEN
button to save a recording timer.
Press
RED
button to cancel.
Editing a Recording Timer
Select a timer in the Recording Tiners menu
by pressing “ ” or “ ” button. Press
GREEN
button on the remote control and Modify Timer
OSD will be displayed on the screen.
You can press
RED
button to set this recording
as discarded when the disk is full.
You can set desired preferences and when
completed, you can press
GREEN
button to
save your settings.
Deleting a Recording Timer
Select a timer in the Recording Tiners menu by
pressing “ ” or “ ” button. Press
RED
button
on the remote control to delete. A confirmation
screen will be displayed: “
Delete this timer
?”.
Select YES to delete the timer or select NO to
cancel.
Timers
This feature is used for enabling scart output
on a previously set time interval. Using this
function, you can record programmes on an
external recorder device. When the time is due,
the TV will switch to the selected channel.
