English
- 19 -
After selecting search type as
Digital Aerial
, you can
enter the multiplex or frequency number using the
numeric buttons and press
OK
button to search.
Digital Cable Manual Search
In cable manual scan, you can enter frequency,
modulation, symbol rate and network channel scan
options. After selecting search type as Digital Cable,
you can set the desired options and press OK button
to search.
Satellite Manual Search
In satellite manual scan, you can enter frequency,
polarization, symbol rate, network channel scan
and satellite options. You can then press
OK
button
to search. When the channel is located, any new
channels that are not on the list will be stored.
Note: Frequency, polarization and symbol rate may
change in accordance with the selected channels.
Analogue Manual Search
After selecting search type as analogue, you can use
“ ”/“ ” button to highlight an item and then press “
” or “ ” button to set an option.
Enter the channel number or frequency using the
numeric buttons. You can then press
OK
button
to search. When the channel is located, any new
channels that are not on the list will be stored.
Network Channel Scan
Select Network Channel Scan from the installation
menu by using “ ” or “ ” and OK buttons. Network
Channel Scan selection screen will be displayed.
Select Digital Aerial or Digital Cable and press OK
button to continue.
If you start Digital Aerial scan process, automatic
scanning will start. You can press
“MENU”
button
to cancel.
If you start Digital Cable scan process, the following
screen will be displayed.
You can select frequency ranges from this screen. For
highlighting lines you see, use “ ” or “ ” button. You
can enter the frequency range manually by using the
numeric buttons on the remote control. Set Start and
01_MB70_[GB]_GOLD_PVR_PLATINIUM5_5110UK_42905W_10072602_50185971.indd 19
01_MB70_[GB]_GOLD_PVR_PLATINIUM5_5110UK_42905W_10072602_50185971.indd 19
17.05.2011 17:35:27
17.05.2011 17:35:27
