English
- 27 -
Subtitle Font Size
: Sets subtitle font size (max.
54pt).
Using DLNA Network Service
Information
DLNA (Digital Living Network Alliance) is a standard
that eases viewing process of digital electronics and
makes them more convenient to use on a home
network. For further information, visit www.dlna.org.
DLNA standard allows you to view and play photos,
music and videos stored in the DLNA media server
connected to your home network.
Step 1: Nero Media Home Installation
DLNA function cannot be used if the server program
is not install to your PC. Please prepare your PC
with the provided Nero Media Home programme.
For
more information about the installation, please refer
to appendix G.
Step 2: Connecting to a Wired or Wireless
Network
Wired Connection
Connect your network’s LAN cable to the
•
ETHERNET
INPUT
of your TV. Make sure that the preparation
of media server, connections and network settings
are completed properly (
See the chapter,
Network
Settings
for more information
).
Wireless Connection
IMPORTANT: “Winstron DNUB-236” USB dongle is
required to use wireless network feature. To use your
TV with your wireless network, you need a “Winstron
DNUB-236” Wireless USB dongle.
Please plug in the Wi-Fi dongle to one of the USB
•
ports of the TV.
Select
•
Network Settings
from the
Settings
menu.
Set
•
Con
fi
guration Status
as
Connected
and press
OK
button.
Press
•
BLUE
button to start searching for available
wireless networks. If any active wireless networks
are found, a list will be displayed.
Please select your desired network from the list. If
•
the selected network is protected with a password,
please enter the correct key by using the virtual
keyboard. You can use this keyboard via navigation
buttons (Left/Right/Up/Down) and
OK
button on the
remote control.
Wait until the IP address is shown on the screen. This
•
means that the connection is now established.
See the chapter Network Settings for detailed
con
fi
guration information.
Step 3: Playing Shared Files via Media
Browser
Select
•
Media Browser
by using
Left
or
Right
button
from the main menu and press
OK
button. Media
browser will be then displayed.
DLNA support is available only with Media Browser
•
folder mode. To enable folder mode, go to
Settings
tab in the main media browser screen and press
OK
. In the settings options, highlight
View Style
and
change to
Folder
using
Left
or
Right
button.
Please select desired media type and press
•
OK
If sharing configurations are set properly, the
•
following OSD message will be displayed after
selecting the desired media type. Select
OK
to
display selected network or USB memory content.
If you want to refresh the device list, press
GREEN
button. You can press
“MENU”
to exit.
01_MB70_[GB]_GOLD_PVR_PLATINIUM5_5110UK_42905W_10072602_50185971.indd 27
01_MB70_[GB]_GOLD_PVR_PLATINIUM5_5110UK_42905W_10072602_50185971.indd 27
17.05.2011 17:35:32
17.05.2011 17:35:32
