English
- 37 -
Changes are automatically stored. Press
•
“MENU”
to exit.
Con
fi
guring Source Settings
You can enables or disable selected source options.
The TV will not switch to the disabled source options
when
“SOURCE”
button is pressed.
Select
•
Sources
in the Settings menu and press
OK
button.
Press“
•
” or “ ” buttons to select a source.
Use “
•
” or “ ” button to enable or disable the
selected source. Changes are automatically
stored.
Con
fi
guring Satellite Settings
Select
Satellite settings
in the Settings menu to
con
fi
gure satellite settings. Press
OK
button.
Satellite List
:
To view available satellite list, please
select Satellite list option from satellite settings menu.
If you want to add new satellite information, please
press
YELLOW
button. If you want to change satellite
name, please use the navigation buttons. To delete
a satellite from list, press
BLUE
button or press
OK
to edit.
Antenna Installation
:
In this section, you can
change antenna settings and scan satellite for new
channels.
SatcoDX (optional)
: You can perform SatcoDX
operations using the Satelite Settings. On SatcoDX
menu, there are two options regarding to satcodx
feature as in the following:
You can download or upload satcoDX data. In order
to perform these functions supported for satcodx
feature, a USB device must be connected to the TV
in the
fi
rst place.
You will be able to upload current services and related
satellites & transponders in TV, to a USB device with
a
fi
le named “mb70_sdx.sdx “.
In addition to the uploading feature you will be able
to download one of the satcodx
fi
les stored in USB
device, to the TV. d.
When you select one of these satcodx files, all
services and related satellites and transponders in
the selected
fi
le will be stored in TV. If there are any
installed terrestrial, cable and/or analog services,
they will be kept and only satellite services will be
removed.
Afterwards, check your antenna settings and make
changes if necessary. An error message stating “No
Signal” may be displayed if antenna settings are not
con
fi
gured properly.
Con
fi
guring Network Settings
Note: Your TV’s Network Settings include Wired
and Wireless Connection options. However, if your
TV does not have USB Wi-Fi dongle, you should
use Wired Connection type. If you try to connect via
Wireless Connection when your TV does not have a
USB Wi-Fi dongle, a warning screen will appear and
the TV will not get an IP address. Try connecting the
LAN cable after this and then the TV will be able to
get an IP address.
Con
fi
guring Wired Device Settings
On
•
Network Settings
window you can set network
type of the TV set, which connects the TV to
the Internet. If you are connecting the TV via
01_MB70_[GB]_GOLD_PVR_PLATINIUM5_5110UK_42905W_10072602_50185971.indd 37
01_MB70_[GB]_GOLD_PVR_PLATINIUM5_5110UK_42905W_10072602_50185971.indd 37
17.05.2011 17:35:37
17.05.2011 17:35:37
