VESTEL 65FA7500, Operating Instructions Manual

English

   - 36 -

or press 

YELLOW

 button to scan only the highlighted 

satellite. To save and exit press 

OK

 button.

TKGS installation

After the antenna type is selected and other satellite 

settings are made, press the 

Red

 button to start 

TKGS Installation

. You can select to install 

HD

 or 

SD

 channels during the installation. This selection 

can be done later too using the 

Preferred

List

 option 

under the 

TKGS Installation

 menu. The selection will 

be activated, after switching the TV off and back on 

again or after a manual update as described below. 
If wanted 

TKGS Installation

 can be applied manually 

after the 

First Time Installation

. Press the 

Menu

button. Select 

System>Settings

 and press 

OK

. In the 

sub menu highlight 

Satellite

Settings

 and press 

OK

. 

Then select 

Antenna

Installation

. Then follow the 

above mentioned steps to start a 

TKGS Installation

.

The second way to apply 

TKGS installation

 manually 

after the 

First Time Installation

 is starting an 

update. To do this press the 

Menu

 button and select 

Installation

>

TKGS

Installation

>

Start

update

.

To use the update options of TKGS

TKGS feature keeps your satellite channel lists up-

to-date in three different ways.

Standby:

 While going into standby mode, the TV 

controls the TKGS table version number whether it is 

the last version or not. If any changes are detected, 

TV starts to update. On the next switch-on a message 

will be displayed to inform the user about the changes.

Background:

 When a channel is opened which isn’t 

defined in the TKGS channel lists,

the TV controls 

the TKGS table version number whether it is the last 

version or not. If any changes are detected, TV starts 

to update. When the update is completed a message 

will be displayed to inform the user about the changes.

Manual: 

An update can be started manually any 

time. Press the 

Menu

 button. Highlight 

Installation

and press 

OK

. In the sub menu highlight 

TKGS 

Installation

 and press 

OK

. Than select 

Start Update

and press

 OK

.

While the search continues a message will appear, 

asking whether you want to sort channels according 

to the LCN

(*)

. Select 

Yes

 and press 

OK 

to confirm

.

(*) 

LCN is the Logical Channel Number system that organizes 

available broadcasts in accordance with a recognizable 

channel number sequence (if available).

Note:

 Do not turn off the TV while initializing first time 

installation. Note that, some options may not be available 

depending on the country selection.
In the TKGS system, channels can be blocked by the service 

provider and Audio/Video transmission will not be available 
from these channels.

Using SatcoDX Feature

SatcoDX (optional):

  You  can  perform  SatcoDX 

operations using the Satelite Settings menu. In the 

SatcoDX menu, there are two options regarding to 

the SatcoDx.

You can download or upload SatcoDX data. In order 

to perform these functions a USB device must be 

connected to the TV.
You can upload current services and related satellites 

& transponders in TV, to a USB device.

Additionally you can download one of the SatcoDx 

files stored in USB device, to the TV. 
When you select one of these files, all services and 

related satellites and transponders in the selected 

file will be stored in the TV. If there are any installed 

terrestrial, cable and/or analog services, they will be 

kept and only satellite services will be removed. 
Afterwards, check your antenna settings and make 

changes if necessary. An error message stating “No 

Signal” may be displayed if the antenna settings are 

not configured properly.

Media Playback via USB Input

You can connect a 2.5” and 3.5” inch (hdd with external 

power supply) external hard disk drives or USB memory 

stick to your TV by using the USB inputs of the TV.

IMPORTANT!

  Back  up  your  files  before  making 

any connections to the TV. The Manufacturer will 

not be responsible for any file damage or data loss. 

Certain types of USB devices (e.g. MP3 Players) 

or USB hard disk drives/memory sticks may not be 

compatible with this TV. The TV supports FAT32 

and NTFS disk formatting . 

While formatting a USB hard disk that has 1TB (Tera 

Byte)  or  more  file  capacity,  you  can  experience 

problems with the formatting process. 
Quickly plugging and unplugging USB devices, is a 

very hazardous operation. This may cause physical 

damage to the USB player and the USB device itself. 

Do not pull out the USB module while playing a file.

You can use USB hubs with your TV’s USB inputs. 

External power supplied USB hubs are recommended 

in such a case. 
It is recommended to use the TV’s USB input(s) 

directly, if you are going to connect a USB hard disk. 

Media Browser Menu

You  can  play  photo,  music,  and  movie  files  stored 

on a USB disk by connecting it to your TV. Connect 

a USB disk to one of the USB inputs located on the 

side of the TV. Pressing the 

MENU

 button while in the 

Media Browser mode will access the Picture, Sound 

and Settings menu options. Pressing the 

MENU

 button 

again will exit from this screen.

You can set your Media 

Browser preferences by using the Settings Menu.