VESTEL 65FA7500, Operating Instructions Manual

English

   - 50 -

Remote control - does not operate

• 

The batteries may be exhausted. Replace the 

bateries. 

Input sources - can not be selected

• 

If you cannot select an input source, it is possible that 

no device is connected. if not

• 

Check the AV cables and connections if you have tried 

to connect a device.

Nero MediaHome Installation

To install Nero MediaHome, please proceed as 

follows:

Note

: To use DLNA function, this software should be installed 

to your PC.

1. 

Enter the link below completely in the adress-bar 

of your web browser.

http://www.nero.com/mediahome-tv

2. 

Click the 

Download

 button on the opening page. 

The installation file will be downloaded onto your 

PC. 

3. 

After the download is completed, double click on 

the  installation  file  to  start  the  installation. 

The 

installation wizard will guide you through the 

installation process.

4. 

The prerequisites screen will be displayed first. 

The installation wizard checks the availability 

of required third-party software on your PC. If 

applications are missing they are listed and must 

be installed before continuing installation.

5. 

Click the 

Install

 button. The integrated serial will 

be displayed. Please do not change the displayed 
serial. 

6. 

Click the 

Next

 button. The License Conditions 

(EULA) screen will be displayed.

Please read 

the license agreement carefully and select the 

appropriate check box if you agree to the terms of 

the agreement. Installation is not possible without 

this agreement.

7. 

Click the 

Next

 button. On the next screen you can 

set your installation preferences.

8. 

Click the 

Install 

button. The installation begins 

and  finishes  automatically. A  progress  bar  will 

indicate the state of the installation process.

9. 

Click the 

Finish

 button. The installation is 

completed. You will be directed to the web site of 

the nero software.

10. 

A shortcut is now placed on your desktop.

Congratulations!

 You successfully installed Nero 

MediaHome on your PC.
Run Nero MediaHome by double clicking on the shortcut 

icon.

Software Upgrade

Your TV is capable of finding and updating automatically 

via the broadcast signal or via Internet. 

Software upgrade search via user interface

On the main menu select 

System>Settings

 and then 

More

. Navigate to 

Software Upgrade 

and press 

OK

button. In 

Upgrade Options

 menu select 

Scan for 

upgrade

 and press 

OK

 button to check for a new 

software upgrade.
If a new upgrade is found, it starts to download the 

upgrade. After the download is completed confirm the 

question asking about rebooting the TV by pressing 

the 

OK

 to continue with the reboot operation.

3 AM search and upgrade mode

Your TV will search for new upgrades at 3:00 o’clock if 

Automatic scanning

 option in the 

Upgrade Options

 menu 

is 

Enabled

 and if the TV is connected to an aerial signal 

or to Internet. If a new software is found and downloaded 

successfully, it will be installed at the next power on. 

Note:

 Do not unplug the power cord while led is blinking 

during the reboot process. If the TV fails to come on after the 

upgrade, unplug, wait for two minutes then plug it back in.

Troubleshooting & Tips

Tv will not turn on

Make sure the power cord is plugged in securely to 

wall outlet. The batteries in the remote control may be 

exhausted. Press the Power button on the TV. 

Poor picture

• 

 Have you selected the correct TV system? 

• 

 Low signal level can cause picture distortion.Please 

check antenna access.

• 

Check if you have entered the correct channel 

frequency if you have done manual tuning. 

• 

The picture quality may degrade when two devices 

are connected to the TV at the same time. In such 

a case, disconnect one of the devices.

No picture

• 

No Picture means that your TV is not receiving a 

transmission. Have you selected the correct button on 

the remote control? Try once more. Also make sure 

the correct input source has been selected.

• 

Is the antenna connected properly? 

• 

Is the antenna cable damaged? 

• 

Are suitable plugs used to connect the antenna? 

• 

If you are in doubt, consult your dealer.

No sound

• 

Has the TV been set to mute? To cancel mute, press the 

“ ” button, or increase the volume level.

• 

Sound is coming from only one speaker. Is the balance 

set to one extreme? See Sound Menu section.