EN - 16
6. TROUBLESHOOTING&TRANSPORT
6.1 Troubleshooting
If you still have a problem with your appliance after checking these basic
troubleshooting steps, please contact an authorised service person or qualified
technician.
Problem
Possible Cause
Solution
Warming Drawer does
not switch on.
Power is switched off.
Check whether there is power supplied.
Also check that other kitchen appliances are
working.
Warming Drawer does
not switch on.
Power is switched off.
Tighten the plug or L/N line.
The drawer can not
be pushed and pulled
smoothly.
There is some debris inside to the left
and right rails.
Clean up the debris of the left and right rails.
Signal light does not
light up.
The light is burnt out.
Change the light.
6.2 Transport
If you need to transport the product, use the original product packaging and carry it using
its original case. Follow the transport signs on the packaging. Tape all independent parts to
the product to prevent damaging the product during transport.
If you do not have the original packaging, prepare a carriage box so that the appliance,
especially the external surfaces of the product, is protected against external threats.