Field of application
The freezer is designed to store frozen foods.
Placing
The freezer must be placed on a firm and flat
surface. To ensure a correct functioning a good
air circulation around the freezer is imperative.
Between the air intake and the wall (at the com-
pressor end) there should be at least 10 cm/4 in
and on the other sides at least 3 cm/1.5 in.
The appliance should stand in as cool as
possible and not be exposed to radiant heat from
the sun or other source of heat.
Mains connection
The freezer should be connected to a grounded
wall socket supply of 115 V 60 Hz A.C. via a 10
A fuse or circuit breaker. Permissible voltage
vari/- 10%. Larger variations may affect
the operation of the freezer and the
manufacturer does not give guarantee for any
consequent damages.
Near the freezer there should be an accessible
switch. No other current-consuming devices
should be connected to the same socket as the
freezer.
Many electric installations are equipped with an
GFI-relay. This relay cuts off the current in case
of a leakage and thus gives security against
most accidents caused by electricity.
In regions where the electricity supply takes
place through overhead wires the lightning dur-
ing a storm may affect the installation in such a
way that the GFI-relay cuts off the current. This
circumstance should be considered when the
appliance is placed in areas where a power cut
would not be noticed immediately. This
possibility should be considered when installing
the product.
Note: Some models are equipped with a de-
tachable locking device. If the lock is not used it
should be kept out of reach of children.
Locking device
Push the lids against the ends so that the hole
at the end of the lid catches the pin mounted on
the frame. The locking device (key + lock) is
inserted in the keyhole, tumed to the right and
locked.
Operation and temperature control
The thermostat is placed on the right side of
the freezer at the air intake of the compressor
(the gill grate).
The thermostat knob which is tumed with a coin
has continuously variable setting. The warmest
