Never use sharp or pointed implements. Avoid unnecessary cleaning of the wooden shelves,
as these are made of untreated natural material. Cleaning agents may discolour the shelves.
The sealing strip around the door must be cleaned regularly to prevent discolouration and
prolong service life. Use clean water. After cleaning the sealing strip, check that it continues to
provide a tight seal. Dust collecting on the condenser underneath the cabinet, on the
compressor and in the compressor compartment is best removed using a vacuum cleaner.
Light-emitting diodes designed to last the entire service life of the appliance are used. If it,
however, becomes necessary to replace the light source, please call for service.
Position the shelf with the carving opposite the pin "A", see figure 9. It is now possible to lift up
and pull out the shelf.
Push the shelf all the way back and tip it. It is now possible to remove the shelf.
Replacing the lighting
Removing the shelves 32-45
Removing the shelves 38
Our products are for internal use only do not install outside restaurants, shops.
11
rigo
Italiano
EnglishFrançaisDeutsch
