Vestfrost Solutions 13
EN
Display components
LEDS
Each LED function is described in the following table.
LED
MODE
Function
ON
Compressor enabled
Flashing
Anti-short cycle delay enabled
ON
An alarm is occurring
ON
Recording activated
ON
Battery status OK
Flashing
Battery is being charged
Flashing
Charging problem or battery failure
°C/°F
ON
Measurement unit
°C/°F
Flashing
Programming phase
Buttons
SET
To display target set point in programming mode it selects a parameter og
confirm an operation.
(UP) To enter fast access menu In programming mode it browses the
parameter codes or increases the displayed value.
(DOWN) In programming mode it browses the parameter codes or de-
creases the displayed value.
DATA
Export data from button.
Not relevant.
REC
Log activation and deactivation from button (Password protected).
