EN-21
EN
BEFORE CALLING YOUR AFTER SALES SERVICE
If your fridge is not working properly, it may be a minor problem, therefore check the
following, before calling an electrician to save time and money.
ERROR TYPE
MEANING
WHY
WHAT TO DO
E01
Sensor warning
Call Service for assistance as
soon as possible.
E02
Sensor warning
Call Service for assistance as
soon as possible.
E03
Sensor warning
Call Service for assistance as
soon as possible.
E06
Sensor warning
Call Service for assistance as
soon as possible.
E07
Sensor warning
Call Service for assistance as
soon as possible.
E08
"Low voltage
Warning"
When the power supply
gets lower than 170 V
the appliance gets to
steady position.
• This is not a failure. This
prevents any damages
on the compressor. This
warning will off after the
voltage gets required
level.
• If the warning continues,
please contact with
authorized technical
service.
E10
"Refrigerator comp.
Not Cold enough"
Ideal temperature for
Ref. Compartment is
+4
o
C. If you see this
warning your foods
have risk of spoiling.
This warning
becomes visible
if electricity is off
for a long time
(most probably) or
the refrigerator is
activated for the
first time or hot food
is loaded to the
appliance.
1. Set the refrigerator
temperature to colder values
or set the super cooling
mode until the compartment
gets to normal temperature.
2. Do not open the door
much until this failure is off.
3. Please empty the location
at the front area of air duct
channel holes.
4. Please be careful while
loading the appliance in order
not to avoid the ventilation
at the areas which are very
close to the sensor.
5. Please don’t open the
refrigerator doors frequently
until the warning disappears.
6. If the warning continues,
please contact with
authorized technical service.
