TABLE OF CONTENTS
Rev. 11/8/2021
COL, MANUAL
TABLE OF CONTENTS
Copyright 2021 Vestil Manufacturing Corp. Page 1 of 20
COL-X-XX-XX
&
-HDG
(
HOT DIP GALVANIZED
)
CROSS
OVER
LADDERS
-
I
NSTRUCTION
M
ANUAL
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the
packaging and maintains the orientation of the product in the packaging; then inspect the product closely
to determine whether it sustained damage during transport. If damage is discovered during the
inspection, immediately record a complete description of the damage on the bill of lading. If the
product is undamaged, discard the packaging.
NOTES:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where
the product is used is exclusively the responsibility of the owner/end-user.
2) VESTIL is not liable for any injury or property damage that occurs as a consequence of failing to apply either: a)
the instructions in this manual; or b) information provided on labels affixed to the product.
Neither is Vestil
responsible for any consequential damages sustained as a result of failing to exercise sound judgment
while assembling, installing, using or maintaining this product.
V
ESTIL
M
ANUFACTURING
C
ORP
.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestilmfg.com
e-mail:
info@vestil.com
Table of Contents
Page
Signal Words
………………………………………………………………………………………….………………
2
Safety Instructions
…………………………………………………………………………..……………………….
2
Exploded Parts Diagrams and Bills of Materials
………..………………………………………………………..
3
-
18
Labeling Diagram
.………….….……………………………………………………….........................................
19
Limited Warranty
……………………………………………………………………………………………….…….
20
