3
3
3
3
3
3
3
3
2 Check the horn function
3 Check the air gap of the electromagnetic brake
4 Test the emergency braking
5 Test the reverse and regenerative braking
6 Test the safety (belly) button function
7 Check the steering function
8 Check the lifting and lowering function
9 Check the tiller arm switch function
General
4
4
4
0 Check if all decals are legible and complete
1 Inspect the castors, adjust the height or replace these if worn out.
2 Carry out a test run
b. Lubricating points
Lubricate the marked points according to the maintenance checklist. The required grease specification is:
DIN 51825, standard grease.
Fig. 1: Lubricating point
s
3
Summary of Contents for EPT-2745-45
Page 2: ......
