Rev. 1/19/2017
PLDL, MANUAL
Copyright 2017 Vestil Manufacturing Corp.
Page 2 of 5
Specifications:
Thank you for purchasing a PLDL-series “Plate and slab material dolly” made by Vestil Manufacturing Corporation.
Our dollies are durable, high-quality products engineered for dependability and simplicity. Dimensions and other
product specifications appear in the following table.
Signal Words:
This manual uses SIGNAL WORDS to call attention to uses of this product that are likely to result in personal injuries
or property damage. The signal words used in this manual appear below along with their definitions.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or SERIOUS
INJURY.
Identifies practices likely to result in product/property damage, such as operation that might damage the
product or other property.
NOTE:
“LD” in the model name indicates a light-duty unit; “HD” is used to identify heavy-duty units.
Model
Maximum Rated
Load
Wheel
Diameter
Wheel Type
Dimensions in Inches Net weight
PLDL-LD-2-4PP
350 lb. (159kg)
4” (10cm)
Polyurethane-on-
polyurethane
6
15
/
16
” x 10” x 9
9
/
16
”
(17.6 x 25.4 x 24.3)cm
9 (4kg)
PLDL-HD-4-8MR
1200 lb. (545kg)
8” (20cm)
Rubber-on-steel
12
1
/
4
” x 12 x 13
1
/
4
”
(31.1 x 30.5 x 33.7)cm
32 (15kg)
PLDL-HD-4-8PS
1500 lb. (682kg)
8” (20cm)
Polyurethane-on-
steel
12
1
/
4
” x 12 x 13
1
/
4
”
(31.1 x 30.5 x 33.7)cm
32 (15kg)
PLDL-HD-4-8GFN
1500 lb. (682kg)
8” (20cm)
Glass filled nylon
12
1
/
4
” x 12 x 13
1
/
4
”
(31.1 x 30.5 x 33.7)cm
30 (14kg)
PLDL-HD-4-10PN
750 lb. (341kg)
10” (25cm) Pneumatic nylon
14” x 12” x 14
1
/
4
”
(35.6 x 30.5 x 36.2)cm
26 (12kg)
PLDL-HD-4-10FF
500 lb. (227kg)
10” (25cm) Foam-filled
13
5
/
8
” x 12 x 14
1
/
4
”
(34.6 x 30.5 x 30)
26 (12kg)
FIG 1: PLDL-HD
Exploded Parts Diagram
and Bill of Materials
Item Part
Number
Description
Quantity
1
16-514-143
Frame, weldment, heavy duty
2
2 16-113-019
Spacer
1
3
Wheel packages
16-132-239
16-132-039-001
16-132-208-001
16-132-198-002
16-132-240
Wheel packages
8” rubber-on steel wheel;
8” polyurethane-on-steel wheel;
8” glass filled nylon wheel;
10” x 3.5” pneumatic wheel for ¾”
axle; -OR-
10” foam filled wheel
2
2
2
2
2
4
16-001-202-A
Heavy-Duty Spray-on Liner
2
5 11105
3
/
8
” –16 x 1” grade A, zinc-plated
hex bolt
2
6 16-112-025
Axle,
long
1
7 65077
1
/
8
” x 1
1
/
4
” zinc-plated cotter pin
4
8 37026
3
/
8
” - 16 zinc-plated nylock jam nut
2
9
33018
3
/
4
” zinc-plated flat washer
4
