background image

Rev. 7/14/2016 

    

PMPS, MANUAL 

                             Copyright 2016 Vestil Manufacturing Corp.                      

Page 22 of 22 

LIMITED WARRANTY  

Vestil Manufacturing Corporation (“Vestil”) warrants this product to be free of defects in material and workmanship during the 
warranty period. 

Our warranty obligation is to provide

 

a replacement for a defective original part

 

if

 

the part is covered by the 

warranty

after we receive a proper request from the warrantee (you) for warranty service

 

Who may request service? 

Only a warrantee may request service.  

You are a warrantee 

if

 

you purchased the product from Vestil or from an authorized 

distributor AND Vestil has been fully paid. 

 

What is an “original part”? 

An original part is a part 

used to make the product as shipped

 to the warrantee. 

 

What is a “proper request”? 

A request for warranty service is proper if Vestil receives: 1) a photocopy of the Customer Invoice that displays the shipping date; 
AND 2) a written request for warranty service including your name and phone number.  Send requests by any of the following 
methods: 

 

 

     

Mail    

 

 

                  Fax   

 

 

Email 

       Vestil Manufacturing Corporation 

 

           (260) 665-1339 

 

    sales@vestil.com 

       2999 North Wayne Street, PO Box 507                    Phone 
       Angola, IN 46703 

 

 

 

           (260) 665-7586 

 

In the written request, list the parts believed to be defective and include the address where replacements should be delivered. 

 

What is covered under the warranty?

 

After Vestil receives your request for warranty service, an authorized representative will contact you to determine whether your claim 
is covered by the warranty.  Before providing warranty service, Vestil may require you to send the entire product, or just the 
defective part or parts, to its facility in Angola, IN. The warranty covers defects in the following 

original

 dynamic components: 

motors, hydraulic pumps, electronic controllers, switches and cylinders.  It also covers defects in 

original

 parts that wear under 

normal usage conditions (“wearing parts”): bearings, hoses, wheels, seals, brushes, batteries, and the battery charger. 

 

How long is the warranty period?

 

The warranty period for original dynamic components is 1 year. For wearing parts, the warranty period is 90 days. The warranty 
periods begin on the date when Vestil ships the product to the warrantee.  If the product was purchased from an authorized 
distributor, the periods begin when the distributor ships the product.  Vestil may, at its sole discretion, extend the warranty periods 
for products shipped from authorized distributors by 

up to

 30 days to account for shipping time.  

 

If a defective part is covered by the warranty, what will Vestil do to correct the problem?

 

Vestil will provide an appropriate replacement for any 

covered

 part.  An authorized representative of Vestil will contact you to 

discuss your claim. 

 

What is not covered by the warranty? 

1. Labor; 
2. Freight;   
3. Occurrence of any of the following, which automatically voids the warranty: 

 Product misuse; 

  Negligent operation or repair; 

  Corrosion or use in corrosive environments; 

  Inadequate or improper maintenance; 

  Damage sustained during shipping; 

  Collisions or other incidental contacts causing damage to the product; 

 Unauthorized modifications: DO NOT modify the product IN ANY WAY without first receiving written authorization from 

Vestil.  Modification(s) might make the product unsafe to use or might cause excessive and/or abnormal wear. 

 

Do any other warranties apply to the product? 

Vestil Manufacturing Corp.

 

makes no other express warranties. All implied warranties are disclaimed to the extent allowed by law. 

Any implied warranty not disclaimed is limited in scope to the terms of this Limited Warranty. 

 
 
 

Summary of Contents for PMPS Series























Reviews: