- 9 -
8.2. Regulatory audit / recalibration
9. Maintenance
Uni-Link requires no maintenance except regular cleaning after each use.
- Wipe off moisture or dust using a slightly damp, clean cloth.
- Keep the Uni-Link in a dry, clean place.
- Never use cleaning solutions or high-pressure water.
Uni-Links are as standard supplied with a certificate of test and calibration which is valid for
one (1) year.
The certificate indicates the values obtained during the adjustment. A new certificate of test
and calibration will be issued every time a calibration is conducted.
An annual check of each device is recommended.
10. Waste electrical and electronic equipment (WEEE)
11. Warranty
Our products are warrantied for defects in materials or workmanship for a period of one (1) year from
the date of purchase.
In the event of a defect during the warranty period, the Uni-Link must be returned, with freight (and
all duties and taxes) prepaid by the Buyer. Vetec A/S or the distributor will, according to their choice,
repair or replace the defective unit.
The following faults are not covered by the warranty:
- Faults resulting from normal wear and tear.
- Parts of a consumable nature.
- Products that have been subject to unauthorized modifications.
- Faults resulting from incorrect installation or use.
- Damp or water damage exceeding the IP classification.
A Uni-Link must not be thrown away with general rubbish. Any
disposal of the device must be carried out in accordance with
the regulations in force in the country of use. Contact your local
government’s recycling or solid waste department for more infor-
mation regarding the proper disposal of electronics in your region.
