J2
J3
J4
J5
J12
Water temperature sensor fault.
Outside air temperature sensor fault.
Extract air temperature sensor fault.
Exhaust air temperature sensor fault.
Current converter (pressure, CO
2
).
Settings
Process
Fan speed
For fan speed setting press “FAN” till required speed will be indicated: LOW, MED,
HIGH.
Setpoint
Supply air temperature can be changed with buttons in lower lever than temperature
setpoint.
Time and date
1. Press
CLOCK
to reach setting.
2. Press▲▼to set year and press
CLOCK
again to confirm.
3. Press▲▼to set month and press
CLOCK
again to confirm.
4. Press▲▼to set day and press
CLOCK
again to confirm.
5. Press▲▼to set hour and press
CLOCK
again to confirm.
6. Press▲▼to set minutes and press
CLOCK
again to confirm.
Programming
1. Press
PROG
to reach events settings, week day will flash.
If
POWER
will be pressed, program mode will switch OFF.
2. Press▲▼to select week day.
If
RESET
will be pressed, events of selected day will be deleted.
If
POWER
will be pressed, program mode will switch OFF, events will be saved.
Press
PROG
, event number will flash.
3. Press▲▼to select event.
If
POWER
will be pressed, display will switch to week day selection.
Press
PROG
, start time of selected event will flash.
4. Press▲▼to set hour.
If hour is set to
hh
and
PROG
is pressed, selected event will be deleted.
Press
PROG
, event start minutes will flash.
5. Press▲▼to set minutes.
Press
PROG
, temperature setpoint and fan speed of selected event will flash.
6. Press▲▼to set temperature.
