14.
Insert the side ATEX cover (Fig. 12/8) and tighten screws (Fig. 12/9) with a torque
of 3.4 Nm.
6.2.9
Spare parts
Spare parts for the Smart
Fork
®
can be ordered from the manufacturer. Customer service
can identify the required spare parts from the order number on the hard stamping
. Always install original components. The use of third-
party components invalidate the ATEX approval as well as the guarantee and the manu-
facturer’s responsibility for any consequential damage.
The following spare parts are available:
Object
Quan-
tity
Component number
Description
1
1
CAM4040062004
FrontCam
2
1
DIN 3771 - 22.7 x 1.78
- N - NBR 70
O-ring
3
1
ENG - 277101
ATEX polycarbonate lens
4
1
ENG - 277100
ATEX cover, front
5
2
ISO10642 M6x25 A4
Hexagon socket countersunk screws M6 x
25
6
2
ISO4026 M12x16 A4
Threaded pins M12 x 16
7
1
ENG - 277072
Seal, side
8
1
ENG - 277102
ATEX cover, side
9
4
ISO10642 M5x25 A4
Hexagon socket countersunk screws M5 x
25
6.3
After completion of maintenance work
Personnel:
n
Driver of industrial trucks
Protective equipment:
n
Protective work clothing
n
Industrial helmet
n
Protective gloves
n
Safety shoes
Carry out the following steps upon completion of maintenance work or troubleshooting
and before returning the assistance system and industrial truck to service:
1.
Tighten all previously loosened screw connections giving due consideration to the
respective torques.
2.
Reinstall all previously removed protective equipment and covers.
Maintenance
After completion of maintenance work
EN
SmartFork
®
FrontCam ATEX for use in the Ex zone - BVS 20 ATEX E 108 X
47