20
100506.01
Electronic Compass / GPS ECGPS
4.1.10 Unit select (C10)
For distances resp. speed you can select
either km resp km/h or miles resp. knots.
• Press
in the default mode to enter
the menu.
• Use the
/
buttons to select
the Unit select menu (C10).
• Press
to enter the Unit select
menu.
• Use the
/
buttons to select
Km or Miles.
• Press
to return to the main
menu or
• Keep
pressed for two seconds
to exit to the default mode.
4.1.11 Trip reset (C11)
To read the trip distance or to reset trip dis-
tance the Trip reset menu is to be used.
• Press
in the default mode to enter
the menu.
• Use the
/
buttons to select
the Trip reset menu (C11).
• Press
to enter the Trip reset
menu.
• Use the
/
buttons to select
Yes or No.
• Press
to return to the main
menu or
• Keep
pressed for two seconds
to exit to the default mode.
4.1.12 GPS info (C12)
Select this menu to view the number of
used GPS sattelites.
• Press
in the default mode to enter
the menu.
• Use the
/
buttons to select
the GPS info menu (C12).
• Press
to enter the GPS info
menu.
• Press
to return to the main
menu or
• Keep
pressed for two seconds
to exit to the default mode.
4.2 Service menu
To enter the service menu you have to
press
when you switch the power
on.
4.2.1 Display info
Press
to view: Display type, interface,
software version.
4.2.2 Compass info
Press
to view: Compass type, inter-
face, software version.
4.2.3 Display reset
Press
to reset the display to factory
settings, except for the log.
4.2.4 Compass reset
Press
to reset the compass to factory
settings.
4.2.5 Segments check
Press
to turn on all segments to
check for faulty segments
4.2.6
Demo mode
Press
to run demo mode.
4.2.7 Close menu
To exit the service menu press
.
