AUTOMIX 10 (EN) 0508
OPTIONALS
AUTOMIX 10RB is a room sensor for measuring and setting the
temperature inside the house.
AUTOMIX 10RB should be installed if the room temperature
fluctuates because the building is affected by sunlight or wind.
A green LED indicates that power is on. When the motor runs, the
LED dims slightly.
AUTOMIX 10RC is a remote control designed for floor heating
systems. It is used to conveniently adjust/parallel displace the
heating graph. Supply water temperaure can be lowered 9°C
or raised 6°C. AUTOMIX 10RC corresponds to the function
parallel displacement F.
A green LED indicates that power is on. When the motor runs, the
LED dims slightly.
TECHNICAL DATA
Type of control
PI-control with microprocessor
Voltage
18 VAC 50/60 Hz
Adapter
230/18 VAC 200 mA with 1,7 m wire
Power consumption
3 VA
Torque
5 Nm
Angle of rotation
90°
Heating graphs
1 to 9, stepless
Parallel displacement
+/- 10°C supply water temperature, stepless
Min. supply water limiter
+15°C to +35°C supply water temperature
Max.supply water limiter
+40°C to +90°C supply water temperature
Room sensor AM 10RB
+12°C to +27°C room temperature, stepless
Remote control AM 10RC
-9°C to +6°C supply water temperature, stepless
Manual operation
Yes, in case of power failure
Prtotection class
IP 40
Dimensions
77 x 90 x 90 mm
Weight
0,53 kg
www.acaso.se
