VGo User Guide
v1.4.1
© Copyright 2011 VGo Communications, Inc. All rights reserved.
Page 22
Looking Around (without moving)
To look up or down
If you are using a mouse with a scroll wheel (recommended), you can roll the scroll wheel to tilt
the camera up or down. Also, camera tilt arrow keys (up and down) will automatically appear in
the upper left corner of the window when you move your mouse pointer over the video
window. Click on either arrow to change your view up or down.
To look left or right
Move your mouse pointer over the video window to illuminate the left and right arrows at the
bottom of the window. Click on the left arrow to look left (VGo will rotate in place) or click on
the right arrow to look right. You can also use the arrow keys on your PC/laptop keyboard.
Left arrow – Look left (VGo turns in place to the left)
Right arrow – Look right (VGo turns in place to the right)
Camera Tilt
arrows
Turn in place
left and right arrows
Look Mode
Button
To look all around using the
Look Mode
Button
Look Mode enables you to look around an area using a single control rather than the alternative
of combinations of up/down camera controls and left/right drive controls. When you are in
Look Mode, Driving mode is turned off.
Click on the
Look
button - a little green light appears inside the button indicating the Look mode
is turned on. Move your mouse pointer to the center of the video window. Relative to the
center of the video image, click and hold your left mouse button and move your mouse pointer
in the direction you want to look. For example, if you want to look down to your left, drag the
mouse pointer to the lower left side of the video window. VGo’s camera will automatically tilt
and the VGo will turn in place to the left. The speed at which VGo “looks around” is relative to
the distance from the center of the viewing window.
To turn off
Look
Mode (and turn drive mode back on), click on the
Look
button again.
