VGo User Guide
v1.4.1
© Copyright 2011 VGo Communications, Inc. All rights reserved.
Page 44
Admitting Visitors Manually
Your VGo is set to automatically be available (auto-answer) for incoming visitors.
If you have changed the
SETTINGS
to manually admit incoming visitors, the visitor will
not be admitted until you tell the VGo to answer, much in the same way that you
answer the door in your home when someone knocks. If you don’t answer the door, no
one comes in.
Look at the display to see who is requesting to visit.
o
Using the blue touchpad, touch the button under
Answer
. When using the
handheld remote control, press the
ANSWER
button.
o
If you don’t want to admit the visitor, using the blue touchpad, touch the button
under
Ignore
. When using the handheld remote control, press
Hang-up
.
o
You can also do nothing, in which case the lights will continue to flash until the
person attempting to visit goes away.
Using your VGo to call out
From the
Home
menu, use the
LEFT/RIGHT ARROW KEYS
to highlight
CONTACTS
and
touch
OK
to select.
Use
UP/DOWN ARROW KEYS
to highlight a contact, touch the center
OK
button to
select.
A list of available locations for that contact will be displayed.
Use
UP/DOWN ARROW KEYS
to highlight a location, touch the corresponding blue
button for
CALL
.
Note: only sites/contacts that have a green presence indicator (to the right of the name) can
be called. If the presence indicator is red or grey– that site/contact is unavailable.
