VGo User Guide
v1.4.1
© Copyright 2011 VGo Communications, Inc. All rights reserved.
Page 48
to
BackSpace
to delete the characters and then enter the correct Identity – then
select
Accept
.
o
On the
Key PassPhrase
screen (
TLS, LEAP, PEAP,
or
TTLS
), enter the Key
passphrase associated with the client certificate or identity.
o
On the
PEAP Version
screen (
PEAP
only), choose
0
or
1
.
o
On the
PEAP Label
screen (
PEAP
only), choose
Client EAP Encryption
or
Client
PEAP Encryption
.
o
On the
Secondary EAP Method
screen (
PEAP, TTLS
), choose
MD5
or
MS-Chapv2
o
On the
IP Addressing
screen, select the connection type. Most wireless
networks use
DHCP
. If your network administrator requires a
Static IP
address,
you’ll need the following additional information:
IP
Address
Sub
Netmask
Default
Gateway
DNS
Nameserver
The VGo will then connect to the network – this may take a minute or two – you will see
Please Wait . . . Connecting to . . .
A green check mark will appear on the screen
when the connection is successful.
o
If you are setting up the VGo for the first time, the VGo will then display a new
screen that says “
Now we need to authenticate your VGo
”. Leave your VGo at
that screen and go to the section of this document titled:
Step 3 – Creating a
VGo account and downloading the VGo PC App.
o
Note: If you get an error message, the problem could be with either the VGo’s
connection to the WiFi or the WiFi connection to the internet. Both must be
working for the VGo to be authenticated.
