VIA Mobile360 M820 User Manual
35
Step 4
To adjust the angle of the camera, remove the cover located on the right-hand side of the camera housing.
Loosen two (M3x6) screws then insert a screwdriver in the outer screw to rotate the camera to the correct
angle. Once the camera angle has been positioned, tighten the two screws to secure the camera and replace
the cover.
Figure 56: Adjusting the Front ADAS camera angle
Step 5
Connect the power and microphone/speaker adapter cable to the socket of the corresponding extension cable.
Figure 57: Connecting the power and microphone/speaker adapter cable
Note:
Refer to
for details for connecting the FAKRA cable to the camera and system.
