background image

 
 
 
                                                                                                                                                                                                                                                                                                                                                             

 
 
 

 

2

 

With USB controller as well as capability of expanding to 8x USB2.0 function ports 
delivering 480Mb/s bandwidth and rich connectivity,  the motherboards meet future USB 
demand also have built-in hardware monitor function to monitor and protect your computer.   

The motherboards provide high performance & meet future specification demand of the next 
generation operation system.    It is a wise choice for your non-stop business computing. 

 

Some special features---

CPU Thermal Throttling/ CPU Vcore 7-shift ) 

in this motherboard are 

designed for power user to use the over-clocking function in more flexible ways. But please be caution 
that the over-clocking maybe cause the fails in system reliabilities. This motherboard provides the 
guaranteed performance and meets the demands of the next generation computing. But if you insist to 
gain more system performance with variety possibilities of the components you choose, please be 
careful and make sure to read the detailed descriptions of these value added product features, please 
get them in the coming section.     

 

1-1.1   Special Features of Motherboard 

 

CPU Thermal Throttling Technology

---(The CPU Overheat Protection Technology)   

To prevent the increasing heat from damage of CPU or accidental shutdown while at high workload, 
the CPU Thermal Throttling Technology will force CPU to enter partially idle mode from 87.5% to 
12.5% according to preset CPU operating temperature in BIOS (from 40

 to 90

). When the 

system senses the CPU operating temperature reaching the preset value, the CPU operating bandwidth 
will be decreased to the preset idle percentage to cool down the processor. When at throttling mode the 
beeper sound can be optionally selected to indicate it is in working.

 

 

 

CPU Smart Fan

---( The Noise Management System(Not Support 3-pin CPU Fan) ) 

 

It’s never been a good idea to gain the performance of your system by sacrificing its acoustics. CPU 
Smart Fan Noise Management System is the answer to control the noise level needed for now-a-day’s 
high performance computing system. The system will automatically increase the fan speed when CPU 
operating loading is high, after the CPU is in normal operating condition, the system will low down 
the fan speed for the silent operating environment. The system can provide the much longer life cycle 
for both CPU and the system fans for game use and business requirements. 

 

CPU Vcore 7-Shift

--- (Shift to Higher Performance)   

The CPU voltage can be adjusted up by 7 steps for the precisely over-clocking of extra demanding 
computing performance. 

 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for P4M900















Reviews: