background image

 
 
 
                                                                                                                                                                                                                                                                                                                                                             

 
 
 

 

3

 

 
 
 
 

1-2  

Specification 

Spec Description 

Design 

 

Micro ATX form factor 4 layers PCB size: 24.4x21.0cm 

Chipset 

 

VIA P4M900 North Bridge Chipset   

 

VIA VT8237R Plus South Bridge Chipset   

CPU Socket 
(LGA 775 Socket) 

 

Support Intel Pentium 4, Celeron D, Pentium D, and Core 2 Duo

775-Land LGA Package utilizes Flip-Chip Land Grid Array 
(FCLGA4) package processor 

 

Support FSB Frequency 533MHz / 800 / 1066MHz 

Memory Socket 

 

240-pin DDRII Module socket x 2   

 

Support 2pcs DDRII 667/553 / 400 system memory modules 

which are expandable to 4.0GB 

Expansion Slot   

 

PCI-Express x16 slot 1pcs deliver up to 8GB/s concurrent bandwidth

 

PCI-Express x1 slot 1pcs delivers up to 512MB/s concurrent 

bandwidth 

 

32-bit PCI slot x 2pcs

 

Integrate IDE and 
Serial ATA RAID 

 

Two PCI IDE controllers support PCI Bus Mastering, ATA 

PIO/DMA and the ULTRA DMA 33/66/100/133 functions that 
deliver the data transfer rate up to 133 MB/s; Two Serial ATA 
ports provide 

150

 MB/sec data transfer rate for 

two

 Serial ATA 

Devices and offer RAID 0, 1, JBOD functions 

VGA 
 

 

Integrated 

Chrome9™ HC IGP

   

 

128 bit 2D/3D engine with dual pixel pipeline

 

 

250MHz engine clock speed.

 

LAN 
 

 

 Integrated VIA 6103L PCI-10 /100 LAN PHY   

 

Supports Fast Ethernet LAN function provide 10Mb / 100Mb / 

s data transfer rate 

Audio 

 

VIA VT1616B AC’97 Digital Audio controller integrated 

 

6-channel AC’97 Audio CODEC onboard 

 

Audio driver and utility included 

BIOS 

 

Award 4MB Flash ROM 

Multi I/O 

 

PS/2 keyboard and PS/2 mouse connectors 

 

Floppy disk drive connector x1 

 

Parallel port x1 

 

Serial port x1 

 

VGA port x1   

 

USB2.0 port x 4 and headers x 4 (connecting cable option)   

 

Audio connector (Line-in, Line-out, MIC) 

 
 

Summary of Contents for P4M900















Reviews: