SOM-6X50 User Manual
6
2. Onboard I/O Connector
This chapter provides information about the SOM-6X50’s onboard I/O connector and its functionality.
2.1 Debug Connector
The SOM-6X50 comes with a debug connector which is used for debugging purposes. It supports TX/RX. The
pinouts of the debug connector are shown below.
Table 1: Debug connector pinouts
Pin
Signal
1
UART0TXD
2
UART0RXD
3
GND
4
SFCLK
5
SFDO
6
SFDI
7
SFCS0-
8
VCC33_SF
Figure 5: Debug connector diagram