SOM-6X50 User Manual
7
3.
Hardware Installation
This chapter provides information about the hardware installation procedures.
3.1 Installing the SOM-6X50 Module on the SOMDB1
Carrier Board
Step 1
Install the thermal pad on the top of the processor on the SOM-6X50 module then flip over the module.
Figure 6: Installing the thermal pad
Step 2
Align the notch on the SOM-6X50 module with the counterpart on the SOM DDR3 SODIMM slot on the
SOMDB1 carrier board then insert the module at a 30° angle.
Figure 7: Installing the SOM-6X50 module
SOMDB1
1
1
VT
S8666
C
30