SOM-6X50 User Manual
10
Appendix A.
SOMDB1 Carrier Board
Reference
A.1.
Board Specifications
Onboard I/O
• 1 x LCD panel connector
• 1 x Touch connector
• 2 x USB 2.0 connectors
• 4 x COM connectors
• 2 x UART pin headers
• 1 x Debug connector & pin header
• 1 x Camera connector
• 1 x GPIO pin header (9 GPIO)
• 1 x I²C pin header (3 x I
2
C)
• 1 x SPI pin header (2 x SPI)
• 1 x IR Receiver sensor & pin header
• 2 x Line-in pin headers
•
3 x Line-out connectors & pin headers (for Mono, Right & Left channel speakers)
• 1 x Audio mono out signal pin header
• 1 x Mic-in connector
• 1 x Headphone pin header
• 1 x RCA pin header
•
1 x System recovery button
•
1 x Watchdog timer switch
•
1 x Power button
•
1 x RTC battery connector
• 1 x DC-in connector
Front Panel I/O
• 1 x Composite RCA jack
• 1 x 10/100Mbps Ethernet port
• 1 x Headphone jack
Back Panel I/O
• 1 x Micro SD card slot
Right Panel I/O
• 1 x HDMI port
• 1 x Micro USB 2.0 OTG port
Power Supply
• 5V ~ 19V DC-in
Operating Temperature
• 0°C ~ 60°C
Operating Humidity
• 0% ~ 95% (non-condensing)
Form Factor
• 160mm x 100mm (6.3” x 3.94”)
