SOM-6X50 User Manual
24
A.2.1.21. RCA Pin Header
The SOMBD1 carrier board comes with a RCA pin header which is used for connecting the display using
component video signals. The RCA pin header is labeled as “J45”. The pinouts of the RCA pin header are shown
below.
Table 20: RCA pin header pinouts
A.2.1.22.
RTC Battery Connector
The SOMDB1 carrier board is equipped with an onboard RTC battery connector which is
used for connecting
the external cable battery that provides power to the 32.768KHz crystal oscillator for Real Time Clock (RTC).
The RTC battery connector is labeled as “J53”. The pinouts of the RTC battery connector are shown below.
Table 21:
RTC battery connector pinouts
Pin
Signal
1
CVBS_IN
2
GND
SOMDB1
VTS8666C
1
1
J45
SOMDB1
VTS8666C
1
J53
1
Pin
Signal
1
VCC-BAT
2
GND
Figure 34: RCA pin header diagram
Figure 35:
RTC battery connector diagram