background image

 

13

 

VIA SOM-9X50-STK Yocto 3.1 EVK Quick Start Guide

wps_cred_processing=2

p2p_disabled=1

To verify the Wi-Fi function, use the following command:

root@aiv8385-linux:~# ps | grep wpa_supplicant

  569 root      8596 S    wpa_supplicant -Dnl80211 -iwlan0 -c/data/wifi/wpa_supplicant.conf

754350 root      3536 S    grep wpa_supplicant

root@aiv8385-linux:~# kill -9 569

root@aiv8385-linux:~# wpa_supplicant -Dnl80211 -iwlan0 -c /data/wifi/wpa_supplicant.conf -B

Successfully initialized wpa_supplicant

rfkill: Cannot open RFKILL control device

WPS: Converting display to virtual_display for WPS 2.0 compliance

WPS: Converting push_button to virtual_push_button for WPS 2.0 compliance

root@aiv8385-linux:~#

To verify if the Wi-Fi connection is workable, enable the interface, with the following command:

root@aiv8385-linux:~# udhcpc -i wlan0 

udhcpc: started, v1.31.1 

Failed to revert interface configuration: Connection timed out 

udhcpc: sending discover 

udhcpc: sending select for 192.168.0.106 

udhcpc: lease of 192.168.0.106 obtained, lease time 86400 

/etc/udhcpc.d/50default: Adding DNS 192.168.0.1

Then use the "ping" command to verify the network connection:

root@aiv8385-linux:~# ping 8.8.8.8 

3.10 

Bluetooth

To enter "interactive mode" for Bluetooth function verification, use the following commands:

root@aiv8362a-linux:~# btmw-rpc-test

increase the priority of btmw_rpc_test.i4_ret:0 @ main

set btmw_rpc_test priority done

[Client]Func:main Line:670--->: IPC/RPC initialize

YZ rpc_init is called

...

...

<I> [BTMW_RPC_TEST] init ok Normal Mode

<I> [BTMW_RPC_TEST] running.

btmw_test_cli>

In the example below, use a Bluetooth speaker to test.
First, get the Bluetooth speaker MAC address, which is "41:42:FC:81:75:7F" in this example.
To verify the Bluetooth function, use the following commands (using the speaker's MAC address in line 4):

btmw_test_cli> MW_RPC_GAP power 1

...

btmw_test_cli> MW_RPC_GAP set conn_disc 1 1

...

btmw_test_cli> MW_RPC_A2DP_SRC active_src 1

...

btmw_test_cli> MW_RPC_A2DP_SRC connect 41:42:FC:81:75:7F

...

btmw_test_cli> MW_RPC_A2DP_SRC write_stream /data/sda1/test.wav

...

btmw_test_cli> 

Summary of Contents for SOM-9X50-STK



















Reviews: