38
Step 3
Step 3
Step 3
Step 3
To reset the CMOS settings, set the jumper on pin 2 and 3 while
the system is off. Return the jumper to pin 1 and 2 afterwards.
Setting the jumper while the system is on will damage the
mainboard.
Setting
1
2
3
Normal Operation (default)
ON
ON
OFF
Clear CMOS setting
OFF
ON
ON
Caution:
Caution:
Caution:
Caution:
Except when clearing the RTC RAM, never remove the
CLEAR_CMOS jumper cap from the default position. Removing
the cap will cause system boot failure. Avoid clearing the CMOS
while the system is on; it will damage the mainboard.
Summary of Contents for VIPRO VP7806
