-5-
Lock
1.
Open both, front and back clasps. See diagrams 1.1
and 1.2.
2.
Now, open the main pre-filter.
3.
Connect the additional pre-filter to the main pre-filter.
See diagram 2.
4.
Close the main pre-filter.
5.
Close and secure both clasps.
6. See part list diagrams for model BH-1000AD and
BH-2000AD fountain head installation.
7. Diagram 3 shows different options of the fountain
head.
8. Place the pump in desired location.
If pump is placed in a pond, raise the pump off the
bottom of the pond by a minimum of 6 inches.
9. Start the ViaAqua® Pond Pump.
Note: The diverter valve
enables water flow to be
directed to either a water
feature, a Terminator
TM
UVC
Sterilizer, or a pond filter.
INSTALLATION SETUP
INTERNAL OPERATION: FOUNTAIN HEAD
Front clasp. Diagram 1.1
Back clasp. Diagram 1.2
Main and additonal pre-filter.
Diagram 2.
Diagram 3.3
Water Bell Head.
Diagram 3.4
Dual Tier Head.
